UHF Interferometer
DF-A0100
The DF-A0100 is single band 100 to 500 MHz antenna array for use in high precision DF applications. The antenna features hardening against lightning-induced surges with an optional lightning conductor attachment available for added protection. Alternately, an optional omni-directional monitoring antenna attachment can be used to provide an additional monitoring channel. The full-size elements give excellent DF sensitivity. Ultimate angular resolution for strong signals is well under 1°. Dipole elements provide good crosspolarisation rejection, and fair performance for signals arriving from above or below the horison. This DF antenna is designed to be used with a 5- channel phase-sensitive receiver, and correlative algorithm. Calibration of the antenna can be performed on request.
Additional information
Product Data sheet
Download data sheetAdditional product downloads
No additional product downloads available.
Specifications
| Frequency range | 100 - 500 MHz |
| Channels/elements | 5 |
| DF method | Correlative interferometer |
| RMS accuracy | < 1 ° (see note 1) |
| Polarisation | Vertical |
| Omni-output | With optional monitoring antenna attachment |
| Nominal input impedance | 50 O |
| Antenna outputs | 5 x TNC(m) pigtails extending 0.2 m from switch interface flange |
| Mechanical | Flange for tower/shelter mounting Switch interface flange |
| Dimensions (Ø x h) | 1480 mm x 2135 mm 2000 mm x 2120 mm (with MISC-A0088) |
| Total mass | < 50 kg |
| Wind survival | 180 km/h (without ice) |
| Temperature (operation) | -40 °C to +70 °C |
| Lightning | - Protected against lightning induced surges - Optional lightning conductor attachment (MISC-A0088) will provide a measure of protection against direct strikes (see note 2) |
| Humidity | 95% |
- Radio Direction Finding
- C-ESM
